收藏本站
我的资料
   
查看手机网站

        河南省启源
重型机械设备有限公司

产品详情

驾驶室控制台

编号 qzpj
产品详情

1、结构特点
  采用优质型材拼焊成高强度骨架,外覆数控机床加工后的优质冷轧板,整个驾驶室外形挺括平整。在骨架内部衬上防火、隔热、隔音材料后进行内部装饰,四周装饰用中密度板及铝塑板装饰或用薄钢板铆接成形。窗户通常采用5mm厚钢化或夹层等安全型玻璃、其透光度不低于80%,玻璃通过橡胶嵌条固定,移窗为铝合金或塑钢型材制成窗框后,通过橡胶嵌条固定,前部挡风玻璃处有安全防护拦杆。门为带保温钢质移门或开式结构门,门上方带有玻璃固定窗,中部配有内外带执手的司机室专用门锁,四周采用密封胶条双层密封。室内地板采用可拆卸的4mm厚钢板,并在上部铺设防滑绝缘绿化橡塑地毯。控制导线可在地板下的导线架上捆扎,电缆出线口进行电缆防磨损处理。如果室外带平台,平台上的地板为花纹、热镀锌格栅板。司机室油漆采用环氧富锌底漆、环氧云铁中间漆、聚胺脂面漆,漆膜总厚度不低于210um。室内通常配有带防护罩的日光灯,灯开关及一只备用电源插座,前挡风玻璃处装有雨刮器及喷水装置。
2、采用标准
  GB/T 14407-1993《通用桥式和门式起重机驾驶室技术条件》
  JT 5020-1986《港口装卸驾驶室》
3、使用环境
  工作环境温度为-25℃~40℃
  使用场地为高温或低温以及尘埃危害等特殊要求的车间、仓库、料场、货场、电站、港口、船厂等,顶部承载能力静载荷 > 2.5KN/m2。


Summary of the cab

1, the structure characteristics

Skeleton is made of high quality material welding into high strength, high quality manufacture, coated with numerical control machine tool processing after the entire cab crisp flat shape. On the frame of internal lining after fire, heat insulation, sound insulation materials for interior decoration, decoration around MDF and aluminum-plastic plate decoration or thin plate with riveting molding. Windows usually use 5 mm thick toughened or laminated safety glass, the light transmittance of no less than 80%, the glass panels by rubber fixed, move the window made of aluminum alloy or plastic profile window frame, through the rubber strip is fixed, the front windshield with security guard rail. Door with insulation steel door or open door structure, above the door with a fixed window glass, equipped with central with a hand inside and outside the driver room dedicated door lock, adopt sealing strip around double seal. Indoor floor is made of removable 4 mm thick steel plate, and laid in the upper antiskid insulated green rubber and plastic carpet. Control wire in the under floor wiring rack strapping, cable and outlet cable abrasion processing. If outdoor platform, the floor of the platform for the decorative pattern, hot dip galvanized gratings. Cab paint using epoxy zinc rich primer, epoxy micaceous iron oxide intermediate paint, polyurethane paint, paint film thickness not less than 210 um. Indoor usually comes with protective cover of fluorescent lamp, lamp switch and a standby power supply socket, windscreen installed with wiper and spray device.

2, with a standard

GB/T 14407-14407 "general bridge type and gantry crane cab technical conditions"

JT, 5020-1986, the port loading and unloading bridge

3, the use of the environment

Working environment temperature is 25 ℃ and 40 ℃

Use space for high or low temperatures and dust hazard and other special requirements of workshop, warehouse, yard, loading bays, power stations, ports, shipyards, etc., at the top of the static load bearing capacity & gt; 2.5 KN/m2


website qrcode

扫描进入手机网站

会员登录
登录
留言
回到顶部